Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Tygon 2375, 1/16"" ID x 3/16"" OD; 50 ft
These transparent tubes are ideal for use with highly aggressive chemicals ¿ acids, bases, ketones, salts, and alcohols. Characteristics include plasticizer free, smoother inner surface, hydrophobic, minimal outgassing, safe disposal via incineration, and nontoxic. NSF 51 Standard compliant and manufactured according to GMP. Temperature range is -108 to 130¿F (-78 to 54¿C). Can be sterilized with ethylene oxide or gamma irradiation.
Grainger InsulMultitapCon PVC 6 AWG 250 kcmil
The Grainger 14V963 is a Milwaukee M18 FUEL 18-Volt Lithium-Ion Brushless Cordless 1/2 in. Hammer Drill/Driver Kit with a 5.0 Ah Battery. It features a POWERSTATE brushless motor for efficiency, run time, and power. The REDLINK PLUS system protects against overload, over-discharge, and overheating. The kit includes the M18 FUEL hammer drill/driver, a REDLITHIUM XC5.0 battery, an M18/M12 charger, and a carrying bag. It has a 1/2 in. ratcheting chuck and a max torque of 1200 in-lbs. The drill measures 7-3/4 in. and weighs 5.1 lbs. with the battery.
AVANTOR MASTERFLEX (VWR LLC) 3-STP TYGN EFOOD 0.51MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Tygon S3™ E-Food, 0.51mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) TUBING MFLEX FDA VITON 26 25FT
Masterflex I/P Precision Pump Tubing, FDA-Compliant Viton, I/P 26; 25 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) 3-STP TYGN EFOOD 2.79MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Tygon S3™ E-Food, 2.79mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) 3-STP TYGN EFOOD 1.14MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Tygon S3™ E-Food, 1.14mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) TUBING MFLEX FDA VITON 18 25FT
Masterflex L/S Precision Pump Tubing, FDA-Compliant Viton, L/S 18; 25 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) 2-STP TYGN E-LFL 0.38MMID 12PK
Masterflex Ismatec Pump Tubing, 2-Stop, Tygon S3™ E-LFL, 0.38 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) 2-STP TYGN E-LFL 1.14MMID 12PK
Masterflex Ismatec Pump Tubing, 2-Stop, Tygon S3™ E-LFL, 1.14 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) 3-STP TYGN E-LFL 1.42MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Tygon S3™ E-LFL, 1.42 mm ID; 12/PK, Avantor